13
Using the Configuration Menu
Home > Wireless > WPA
Wi-Fi Protected Access authorizes and authenticates users onto the wireless network.
WPA uses stronger security than WEP and is based on a key that changes automati-
cally at a regular interval. This mode requires a RADIUS server in the network.
Radius Server 1
IP - Enter the IP Address of the RADIUS server.
Port - Enter the port number that your RADIUS server uses for
Authentication. The default setting of 1812 is the port setting for
many RADIUS servers.
Shared Secret - Enter the Shared Secret. The Shared Secret
must be the same as the Shared Secret on your RADIUS server.
Radius Server 2
Optional. If you have a second RADIUS server, you will
input the same information as shown above.
To Next Page
Loading...
