9
For a typical network setup at home (as shown above), please do the
following:
Getting Started
With its default settings, the DI-614+, when activated, will connect with
other D-Link Air or AirPlus products, right out of the box.
You will need broadband Internet access (a Cable or DSL subscription line into
your home or office).
Consult with your Cable or DSL provider for proper installation of the modem.
Connect the Cable or DSL modem to the DI-614+ wireless broadband router
(see the Quick Installation Guide included with the DI-614+).
If you are connecting a desktop computer to your network, you can install the
D-Link DFE-530TX+ ethernet adapter into an available PCI slot. (See the
Quick Installation Guide included with the DWL-530TX+.)
If you are connecting a laptop computer to your network, install the drivers for
the Ethernet Cardbus adapter (e.g., D-Link DWL-650+) into a laptop
computer.(See the Quick Installation Guide included with the DWL-650+.)
22
22
2
33
33
3
55
55
5
11
11
1
44
44
4
Please refer to the following
sections of this manual for
additional information about
setting up a network:
Networking Basics - learn
how to check and assign your
IP Address; share printers and
files.
Using the Configuration
Menu - learn the settings for
the DI-614+, using the web-
based interface.
To Next Page
Loading...
Need help?
General
