D-Link AC5300 User Manual

An Ethernet-based broadband modem is required to set up the network connection.

Requires a computer with Windows/Mac OS, an Ethernet adapter, and an updated web browser.

Refer to http://www.mydlink.com for specific mydlink app and service requirements.

Angle antennas outward from the base unit to ensure the fastest, most stable network connection.

Connect USB 3.0 flash drive or external hard drive for network content sharing.

Press and hold for six seconds to reset the router to factory default settings.

Connect Ethernet devices such as computers, switches, and game consoles.

Connect your broadband modem to this port using an Ethernet cable.

Select Router or Extender mode; router reboots after mode change.

Solid white indicates proper power connection; solid orange during boot-up.

Solid white for Internet connection; orange for good connection but no Internet.

Solid light indicates active 2.4GHz function; blinks during WPS process.

Solid light indicates active 5GHz function; blinks during WPS process.

Ensure you have your PPPoE username and password from your Internet provider.

Unplug your modem's power; it may need to remain off for up to five minutes.

For modem/router combos, set to 'bridge' mode or consult your ISP.

Attach the eight antennas to the router by twisting them on clockwise.

Use an Ethernet cable to connect the router's Internet port to your modem.

Use Ethernet or Wi-Fi to connect your computer to the router's LAN port.

Plug in the modem power first, wait one minute, then plug in the router power.

Access the router via a web browser by entering http://dlinkrouter.local. or IP address.

Use the D-Link QRS Mobile app on a mobile device for router setup.

Choose your preferred language and click Next to start the setup wizard.

Select your Internet connection type (DHCP, PPPoE, or Static IP).

DSL users must enter their PPPoE username and password provided by the ISP.

For Static IP, enter IP address, Subnet Mask, Gateway, and DNS details from ISP.

Define the Wi-Fi Network Name (SSID) and password for 2.4GHz and 5GHz bands.

Complete the setup wizard and note down your router configuration settings.

Scan QR codes or search the app store to download the QRS Mobile app.

Connect your mobile device to the router's Wi-Fi network using the configuration card.

Launch the QRS Mobile app and tap 'Start' to follow on-screen setup instructions.

After setup, save the new Wi-Fi network name and password on your companion card.

Select the assigned Wi-Fi network name or use WPS to connect devices.

Access router settings via web browser to modify Wi-Fi network name and password.

Reset the router using the reset button to restore factory default settings.

Visit the D-Link website for user documentation, software updates, and technical support.