17
Using the Configuration Menu
Home > WAN > Static IP Address
Secondary DNS
Address
(Optional) Input the Secondary DNS address provided by your
ISP.
Primary DNS
Address
Input the primary DNS address provided by your ISP.
ISP Gateway
Input the Gateway address provided by your ISP.
Subnet Mask
Input the Subnet Mask provided by your ISP.
IP Address Input the IP Address provided by your ISP.
MTU Maximum Transmission Unit; default is 1500; you may need to
change the MTU to conform to your ISP.
Choose Static IP Address if all WAN IP information is provided to you by your ISP. You
will need to enter in the IP address, subnet mask, gateway address, and DNS address(es)
provided to you by your ISP. Each IP address entered in the fields must be in the
appropriate IP form, which are four IP octets separated by a dot (x.x.x.x). The Router will
not accept the IP address if it is not in this format.
MAC Address
The default MAC Address is set to the WAN’s physical inter-
face MAC address on the Router.
Clone
MAC Address
This feature will copy the MAC address of the Ethernet card, and
replace the WAN MAC address of the Router with this Ethernet
card MAC address. It is not recommended that you change the
default MAC address unless required by your ISP.
To Next Page
Loading...
