D-Link AirPlus DI-614+ - 7. Networking Basics; Windows Network Setup Wizard

38
Using the Configuration Menu
Tools > System
Click Backup Setting to save the current settings to the local
Hard Drive.
Click Browse to find the settings file, then click Load.
Save Settings to
Local Hard Drive
Load Settings from
Local Hard Drive
Restore to Factory
Default Settings
Click Reset to Default to restore the factory default settings.
The current system settings can be saved as a file onto the local hard drive. The saved
file or any other saved setting file created by the DI-614+ can be uploaded to the unit. To
reload a system settings file, click on Browse to search the local hard drive for the file
to be used. The device can also be reset back to factory default settings by clicking on
the Reset to Default button. Use the restore feature only if necessary. This will erase
previously saved settings for the unit. Make sure to save your system settings to the
hard drive before doing a factory restore.