54
4. Resetting the DI-614+ to Factory Default Settings
After you have tried other methods for troubleshooting your network, you may
choose to Reset the DI-614+ to the factory default settings. Remember that
D-Link AirPlus products network together, out of the box, at the factory default
settings.
Troubleshooting
To hard-reset the D-Link AirPlus DI-614+ to Factory Default Settings, please do the
following:
Locate the Reset button on the back of the DI-614+.
Use a paper clip to press the Reset button.
Hold for about 10 seconds and then release.
After the DI-614+ reboots (this may take a few minutes) it will
be reset to the factory Default settings.
To Next Page
Loading...
