51D-Link DAP-2360 User Manual
Section 3 - Conguration
WLAN Partition
Displays the current wireless band rate.
Select Enable or Disable.
The default is Enable. When disabled, all
data from the Ethernet to associated wireless
devices will be blocked. Wireless devices can
still send data to the Ethernet.
The default value is Enable, which allows
stations to inter-communicate by connecting
to a target AP. When disabled, wireless
stations cannot exchange data through the
AP.
Wireless Band:
Link Integrity:
Ethernet to
WLAN Access:
Internal Station
Connection:
To Next Page
Loading...
