D-Link COVR-C1210 - Page 65

61D-Link COVR-C1210 User Manual
Section 3 - Conguration
If E-mail notication is Enabled:
From E-mail
Address:
Enter the email address your SysLog messages will be sent from.
To E-mail Address: Enter the email address your SysLog messages will be sent to.
SMTP Server
Address:
Enter your SMTP server address.
SMTP Server Port: Enter your SMTP server port.
Enable
Authentication:
Enable this option if your SMTP server requires authentication.
Account Name: Enter your SMTP account name.
Password: Enter your SMTP account password.
E-mail Log When Full or On Schedule
Send When Log
Full:
If enabled, this option will set the COVR-C1210 to automatically send
the log when it is full.
Send on Schedule: If enabled, this option will set the COVR-C1210 to send the log according
to a set schedule.
Schedule: If you enable Send On Schedule, use the drop-down menu to select
a schedule to apply. The schedule may be set to Always, or you can
create your own schedules in the Schedule section. Refer to Schedule
on page 59 for more information.
Click Save when you are done.