D-Link DAP-1316-ES

8D-Link DAP-1316-ES User Manual
Section 2 - Conguration
Setting Up Your DAP-1316-ES
Plug in the DAP-1316-ES to a power outlet. Verify that the power
LED is blinking orange before continuing.
Outlet
Ethernet
Locate the Wi-Fi name (SSID) and password for your DAP-1316-ES
device. These details are printed on the specication sticker on the
backside of the device. Using your computer or mobile device’s
Wi-Fi connection utility, connect to the SSID of your DAP-1316-ES
and enter the password. If you are unsure of how to connect to a
wireless network, please refer to “Connect to a Wireless Network”
on page 32, or consult your device’s user manual. Once connected,
you are ready to begin the setup process.