D-Link DAP-2695

D-Link DAP-2695 Quick Install Guide
12
ENGLISH
When you have completed the steps in this Installation Guide and congured
your for your network, your network should look similar to this:
Your Setup is Complete
* Maximum Wireless signal rate derived from draft IEEE802.11ac specications. Actual data throughput will
vary. Network conditions and environmental factors, including volume of network trafc, building materials
and construction, and network overhead lower actual data throughput rate.
To setup and manage the DAP-2695 from a computer, use one of the
following methods:
1. Connect a straight through Ethernet cable between the access point
and your computer.
2. Connect the access point to a switch or router and use a computer
from a computer that is also connected to that switch or router.