EasyManuals Logo

D-Link DAP-X1860 Quick Installation Guide

D-Link DAP-X1860
2 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
INSTALLATION
DAP-X1860 || AX1800 Mesh Wi-Fi 6 Range Extender
Quick Installation Guide
Quick Installation Card
ENGLISH
PACKAGE CONTENTS
Quick Installation Guide
DAP-X1860
AX1800 Mesh Wi-Fi 6 Range Extender
OPTION 2OPTION 1
Download the D-Link Wi-Fi app and launch it.
1 /
Tap Install New Device. Scan the QR code on the Quick
Installation Card. Follow the on-screen instructions to complete
the setup.
2 /
QUICK INSTALLATION CARD
www.dlink.com
Model Name: DEVICE
Wi-Fi Name: dlink-XXXX
Password: XXXXXXXX
S/N: 123456789
SETUP QR CODE
D-Link Wi-Fi
D-Link Wi-Fi
DLINK WIFI APP SETUPQUICK WPS SETUP
Plug the DAP-X1860 into a power source near your wireless router.
Wait until the LED starts blinking orange.
1 /
Press the WPS button on your router for 3 seconds. Refer to your
router’s manual for router behaviour.
2 /
You easily can pair your device with any router to extend your wireless
network.
Press the WPS button on your DAP-X1860
for 2-3 seconds. The status LED should start
to blink green.
3 /
When the Status LED turns solid green (may
take up to 5 minutes), this indicates that
your DAP-X1860 is securely connected to
your wireless router.
4 /
Your setup is complete! You can now unplug and move your device to
a location between your router and the area where you want wireless
coverage. By default, your device will share the same Wi-Fi name and
password as your router.
IMPORTANT
WPS may be disabled on some Routers or Modems. If the WPS Status
LED on your Router or Modem does not start blinking when you have
pressed the WPS button, try again and hold it a little longer. If it still
does not blink, STOP, and congure your DAP-X1860 using
Option 2: D-Link Wi-Fi App Setup.

Other manuals for D-Link DAP-X1860

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the D-Link DAP-X1860 and is the answer not in the manual?

D-Link DAP-X1860 Specifications

General IconGeneral
TypeNetwork repeater
WPS push buttonYes
Ethernet LAN data rates100, 1000 Mbit/s
Maximum transfer distance185 m
ModulationOFDM, QAM
Wi-Fi bandDual-band (2.4 GHz / 5 GHz)
Wi-Fi standardsWi-Fi 4 (802.11n), Wi-Fi 5 (802.11ac), Wi-Fi 6E (802.11ax)
Security algorithmsWPA2, WPA3
Wi-Fi data rate (max)1200 Mbit/s
CertificationFCC, IC, CE
Mounting typeWall
Product colorWhite
Ethernet LAN (RJ-45) ports1
Antenna typeInternal
Antennas quantity2
AC input voltage100 - 240 V
AC input frequency50 - 60 Hz
Power consumption (max)9.7 W
Included power plug typesEU
Storage temperature (T-T)-20 - 70 °C
Operating temperature (T-T)0 - 40 °C
Storage temperature (transmitter)5 - 95 °C
Operating temperature (transmitter)10 - 90 °C
Harmonized System (HS) code85176990
Weight and Dimensions IconWeight and Dimensions
Depth75 mm
Width60 mm
Height165 mm
Weight293 g

Related product manuals