D-Link DCS-850L User Manual

20D-Link DCS-850L User Manual
Section 3: Monitoring
Monitoring
mydlink Baby App Home Screen
Once the setup process is complete, you will see the mydlink Baby app Home Screen.
7
1 DCS-850L Tap on the Camera View Snapshot to go to the Live View screen. Refer to "mydlink Baby App Live View" on page 21.
2 Local/Remote Access
Tap on the Home icon to switch from local access to remote access to your DCS-850L.
After you change to remote access, you will see the login screen.*
3 ! Tap on the Exclamation Point (!) icon for helpful hints.
4 Refresh Tap on the Refresh icon to scan for Wi-Fi Baby Cameras on your network that have not yet been added to the app.
5 Camera Setup Wizard Tap on Camera + icon to set up an additional DCS-850L.
6 ? Tap on the Question Mark (?) icon for FAQs (frequently asked questions).
7 Alert Icons
When sound or motion is initially detected, or when the temperature becomes too warm or too cold, the alert icon
changes color and a number appears. As additional detections occur, the number on the alert icon increases.
(To reset alerts, tap on the alert icon.)
*Note: When you log in, the refresh icon will change, allowing you to access the control for push notication. Refer to question 11 of "Troubleshooting" on page 32.
4
6
5
3
2
1

D-Link DCS-850L Specifications

General

LED type	IR
Night mode	Yes
Sensor type	CMOS
Digital zoom	4 x
Video resolutions	320 x 240, 640 x 480 pixels
Fixed focal length	2.44 mm
Optical sensor size	1/4 \
Night vision distance	4.8 m
Pan range	-170 - 170 °
Maximum range	- m
Tilt angle range	-25 - 95 °
Number of lullabies	5
Image formats supported	JPG, MJPEG
Mobile operating systems supported	Android 4.1, Android 4.2, Android 4.3, Android 4.4, Android 5.0, Android 5.1, iOS 6.0, iOS 6.1, iOS 7.0, iOS 8.0, iOS 8.2, iOS 9.0
Night-light	-
Product color	Blue, Pink, White
Power source type	Battery, USB
Interface	Wi-Fi
Wi-Fi standards	Wi-Fi 4 (802.11n)
USB connector type	Micro-USB
Storage temperature (T-T)	-20 - 70 °C
Operating temperature (T-T)	0 - 40 °C
Operating relative humidity (receiver)	20 - 80 %