34D-Link DCS-855L User Manual
Section 8: Troubleshooting
8. How can you power the camera?
The camera can be powered with the provided power adapter. You can also use an external USB battery for total portability. (USB battery is not
included. Requires 5V/2A output.)
9. How do I access the camera remotely?
You can set up a new mydlink account and/or register your camera with mydlink during the initial setup. Once the process is complete, you can
access the login screen for your mydlink account from the Home page by sliding the Home icon switch to the right. Enter the E-mail address and
Password for your mydlink account and press Log in.
With mydlink, you can monitor your baby from anywhere, as long as your smartphone or tablet is connected to the Internet (over Wi-Fi or over a
cellular network).
Note: If you do not enable mydlink, you will only be able to view the camera within your home's wireless coverage area.
10. Should the app be running constantly on my device?
The app can run in the background, allowing you to hear your baby continuously, even when the phone is locked. The smartphone or tablet
can still be used normally while the app is running. If you do not want to hear audio from the camera when the app is open, you can turn o the
Background audio setting on the Conguration menu. If you close the app, the camera audio will be turned o.
11. How do I adjust the sensitivity of motion and audio detection?
From the Live View page, tap on the screen to reveal the icons, and tap the Conguration icon (
) to go to the Conguration menu. Tap the
Events arrow to access the motion and audio detection settings.
To Next Page
Loading...
