What's in the Box
Quick Installation Guide
2K QHD Pan & Zoom Outdoor
Wi-Fi Camera
DCS-8635LH
Power Adapter 2K QHD Pan & Zoom
Outdoor Wi-Fi Camera
(DCS-8635LH)
Accessories
Quick Installation Guide
Simple Setup
Get the mydlink app on the App
Store or on Google Play. Launch the
app, then Sign In or Create a New
Account.
1
2
Power on the device and wait for
the Status LED to flash orange.
Note: Make sure that your mobile device’s
Bluetooth is on.
3
Place your device next to your
mobile device. A prompt will appear
- tap Add Device, then follow the
app instructions.
mydlink
Note: Please set up your device
before mounting it.
Cable Ties
Ethernet Cable Waterproong
Thread the Ethernet connector through the
large waterproof connector as shown.
Insert the Ethernet connector into the
Ethernet plug securely.
Thread the Ethernet connector through the
small waterproof connector, with the inner
threads facing towards the RJ-45 connector.
Insert the Ethernet plug into the large
waterproof connector, then twist the large
waterproof connector clockwise to snap it in
place.
This is a backup of your device’s Setup
Code. Please keep it as future reference
for your device.
Setup Code
Connected to the network and mydlink
Booting up
Ready for setup
Firmware being updated - do not power off
LED Behavior
Status LED
Timeout for setup - please power cycle the device