3
6
The Switch can be used with AC power sources 100 - 240 VAC, 50 - 60
Hz. The Switch’s power supply will adjust to the local power source
automatically and may be turned on without having any or all LAN
segment cables connected.
LED Indicators
The LED indicators of the Switch include Power, Link/Act, FDX/Col
and 100Mbps. The following shows the LED indicators for the Switch
along with an explanation of each indicator.
The Switch LED indicators
♦ POWER This indicator lights green when the Switch is receiving
power, otherwise, it is off.
♦ Link/Act. These LED indicators are lighted up when there is a
secure connection (or link) to any ports. The LED indicators blink
whenever there is reception or transmission (i.e. Activity--Act) of
data occurring at a port.
♦ FDX/Col This LED indicator light green when a respective port is
in full duplex (FDX) mode. Otherwise, it is blinking green when
collisions are occurring on the respective port.
♦ 100Mbps. These LED indicators are lighted up when there is a
secure connection (or link) to 100Mbps Fast Ethernet device at any
of the ports.
To Next Page
Loading...
