D-Link DES-1018MP - Led Indicators

D ES -10 18M P
4
ENGLISH
LED INDICATORS
The LED indicators allow you to monitor, diagnose, and troubleshoot any potential problem within the
switch, connection, or attached devices.
LED Color Status Description
Power
Green Solid light Power on
Off Power off
Link/Act/Speed
10/100/1000Base-T/
SFP Ports (17 to 18)
Green Solid light Secure connection to a 1000 Mbps
Ethernet device is established.
Blinking The port is receiving or transmitting
data.
Amber Solid light Secure connection to a 10/100 Mbps
Ethernet device.
Blinking The port is receiving or transmitting
data.
Off Light off No link
Link/Act/Speed
10/100 Mbps
Ports (1 to 16)
Green Solid light When there is a secure connection (or
link) to 10/100Mbps Ethernet device at
any of the ports.
Blinking When there is reception or transmission
of data occurring at 10/100Mbps.
Off Off No link
PoE
(Ports1 to 16)
Green Solid light The port is successfully connected to a
PoE device and is powering the device
properly.
Red Solid light The PoE port has failed, possibly due
to:
1. PoE total power budget shortage
2. Over current: Exceeds the
power current of powered device's
classication.
3. Short circuit: An intentional short
circuit has been performed on a
powered device.
Off Light off No connection to a PoE device