Need help?Do you have a question about the D-Link Web Smart DES-1210-28P and is the answer not in the manual?
General| Device Type | Web Smart Switch |
|---|---|
| Ports | 24 x 10/100BASE-TX Ports 2 x 10/100/1000BASE-T Ports 2 x 1000BASE-T/SFP Combo Ports |
| PoE Ports | 24 |
| PoE Budget | 193 W |
| Switching Capacity | 12.8 Gbps |
| Forwarding Rate | 9.5 Mpps |
| MAC Address Table | 8K |
| Dimensions | 440 x 250 x 44 mm (17.3 x 9.8 x 1.7 inches) |
| Weight | 3.58 kg (7.9 lbs) |
| Power Supply | Internal |
| Operating Temperature | 0 to 40 °C (32 to 104 °F) |
| Dimensions (W x D x H) | 440 x 180 x 44 mm |
| Primary Function | Layer 2 Switching |
| Standards | IEEE 802.3, IEEE 802.3u, IEEE 802.3ab, IEEE 802.3x |
| Management | Web-based |
| Jumbo Frame Support | 9, 216 Bytes |
| Storage Temperature | -10 to 70 °C |
| Humidity | 10% to 90% (non-condensing) |
Explains terminology and usage conventions within the manual.
Details copyright information and registered trademarks.
Provides front and rear panel details for DES-1210-08P, -28, -28P, and -52 models.
Covers unpacking, desktop, shelf, and rack mounting of the switch.
Introduces Web-based management and SmartConsole Utility for switch management.
Step-by-step guide for installing the SmartConsole Utility.
Guides through initial switch configuration using Smart Wizard, password, and SNMP settings.
Configures IP address, system name, timeouts, and group interval for the switch.
Manages 802.1Q VLANs, asymmetric VLANs, and voice traffic prioritization.
Configures port trunking, LACP, storm control, bandwidth, priority, and PoE settings.
Implements trusted host, safeguard engine, ARP spoofing, port security, SSL, 802.1X, MAC tables, and DHCP screening.
Displays port statistics, tests cables, and manages system logs for troubleshooting.
Covers connecting, logging in, and using common CLI commands for switch management.
Provides detailed hardware, port, feature, and compliance specifications for the switch.
To Next Page
