EasyManua.ls Logo

D-Link DES-1210-08P User Manual

D-Link DES-1210-08P
15 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
DES-1210-08P Firmware Release Notes
1
These release notes include important information about D-Link switch firmware revisions. Please
verify that these release notes are correct for your switch:
- If you are installing a new switch, please check the hardware version on the device label;
make sure that your switch meets the system requirement of this firmware version. Please
refer to Revision History and System Requirement for detailed firmware and hardware
matrix.
- If the switch is powered on, you can check the hardware version by typing “show switch
command via Telnet or by checking the device information page on the web graphic user
interface.
- If you plan to upgrade to the new firmware release, please refer to the Upgrade Instructions
for the correct firmware upgrade procedure.
For more detailed information regarding our switch products, please refer to Related
Documentation.
You can also download the switch firmware, D-View modules and technical documentation from
http://tsd.dlink.com.tw.
Content:
Revision History and System Requirement: ........................................................................ 2
Upgrade Instructions: ..................................................................................................... 2
Upgrade using CLI (via Telnet) ................................................................................... 2
Upgrade using Web-UI .............................................................................................. 3
New Features: ................................................................................................................ 3
Changes in MIB & D-View Modules: .................................................................................. 7
Changes in Command Line Interface: .............................................................................. 10
Problem Fixed: ............................................................................................................. 11
Known Issues: ............................................................................................................. 12
Related Documentation: ................................................................................................ 13
Firmware Version:
2.03.B016
Boot Code Version:
1.00.005
MIB Version:
2.01.001
D-View Module Version:
2.0.1.0
Published:
Aug. 26, 2014

Other manuals for D-Link DES-1210-08P

Question and Answer IconNeed help?

Do you have a question about the D-Link DES-1210-08P and is the answer not in the manual?

D-Link DES-1210-08P Specifications

General IconGeneral
Power over Ethernet (PoE)Yes
LayerLayer 2
MAC Address Table Size8K
Ports2 x 100/1000BASE-X SFP ports
Dimensions280 x 180 x 44 mm (11.02 x 7.09 x 1.73 inches)
Power Input100-240V AC, 50/60Hz
Jumbo Frame SupportYes, up to 9K bytes
Operating Temperature0°C to 40°C (32°F to 104°F)
Storage Temperature-40°C to 70°C
Humiditynon-condensing

Summary

Revision History and System Requirement

Upgrade Instructions

Upgrade using CLI (via Telnet)

Detailed steps for firmware upgrade via Command Line Interface using Telnet.

Upgrade using Web-UI

Step-by-step guide for firmware upgrade via the Web-based User Interface.

Upgrade using SmartConsole Utility

Instructions for performing firmware upgrades using the SmartConsole Utility.

New Features

Changes of MIB & D-View Module

Changes of Command Line Interface

Problem Fixed

Known Issues

Related Documentation

Related product manuals