DES-3000 Series Layer 2 Switch CLI Reference Manual
100
Example usage:
To configure the multicast filtering mode to filter unregistered groups.
DES-3026:4#config multicast filtering_mode
filter_unregistered_groups
Command: config multicast filtering_mode
filter_unregistered_groups
Success.
DES-3026:4#
show multicast filtering_mode
Purpose Used to show the multicast packet filtering.
Syntax
show multicast filtering_mode
Description This command will display the current multicast packet filtering
mode on the Switch.
Parameters None.
Restrictions None.
Example usage:
To view the multicast filtering mode configuration:
DES-3026:4#show multicast filtering_mode
Command: show multicast filtering_mode
Multicase Filter Mode :
forward_unregistered_groups
DES-3026:4#
To Next Page
Loading...
