DES-3000 Series Layer 2 Switch CLI Reference Manual
7
DES-3026:4#show
Command: show
Next possible completions:
802.1p 802.1x account acct_client
address_binding arpentry auth_client auth_diagnostics
auth_session_statistics auth_statistics autoconfig
bandwidth_control command_history config cos
cpu_access_profile dhcp_relay dscp_mapping error
fdb igmp igmp_snooping ipif
iproute lacp_port link_aggregation log
log_save_timing loopdetect mac_notification mirror
multicast multicast_fdb packet port_security
ports radius router_ports scheduling
scheduling_mechanism serial_port session
sim smtp snmp sntp
ssh stp switch syslog
terminal_line time traffic
traffic_segmentation trusted_host utilization
vlan vlan_trunk
DES-3026:4#
Figure 2-6. Next possible completions: show command
In the above example, all of the possible next parameters for the show command are displayed. At the next command prompt, the
up arrow was used to re-enter the show command, followed by the account parameter. The CLI then displays the user accounts
configured on the Switch.
To Next Page
Loading...
