DES-3000 Series Layer 2 Switch CLI Reference Manual
123
enable mirror
Purpose Used to enable a previously entered port mirroring configuration.
Syntax
enable mirror
Description
This command, combined with the disable mirror command below, allows a
mirror entry to be enabled on the Switch, without modifying the port mirroring
configuration.
Parameters None.
Restrictions Only Administrator-level users can issue this command.
Example usage:
To enable mirroring configurations:
DES-3026:4#enable mirror
Command: enable mirror
Success.
DES-3026:4#
disable mirror
Purpose Used to disable a previously entered port mirroring configuration.
Syntax
disable mirror
Description
This command, combined with the enable mirror command above, allows
a mirror entry to be disabled on the Switch, without modifying the port
mirroring configuration.
Parameters None.
Restrictions Only Administrator-level users can issue this command.
Example usage:
To disable mirroring configurations:
DES-3026:4#disable mirror
Command: disable mirror
Success.
DES-3026:4#
To Next Page