DES-3000 Series Layer 2 Switch CLI Reference Manual
130
show vlan_trunk
Purpose Used to display VLAN trunks.
Syntax
show vlan_trunk
Description Displays the VLAN trunk information including VLAN trunk status and
memberships created by the user.
Parameters None.
Restrictions Only Administrator-level users can issue this command.
Example usage:
To show the VLAN trunk information:
DES-3026:4#show vlan_trunk
Command: show vlan_trunk
VLAN Trunk Status : Enable
Member Ports : 1-5,7
DES-3026:4#
To Next Page
Loading...
