DES-3000 Series Layer 2 Switch CLI Reference Manual
157
show igmp access_authentication ports
Purpose Used to display the current IGMP Access Control configuration.
Syntax
show igmp access_authentication ports
Description
The show igmp access_authentication ports command displays the
current IGMP Access Control configuration.
Parameters None.
Restrictions None.
Example usage:
To display IGMP Access Control status for all ports:
DES-3026:4#show igmp access_authentication ports 1-16
Command: show igmp access_authentication ports 1-16
Port Authentication State
------ ---------------------
1 Disabled
2 Disabled
3 Disabled
4 Disabled
5 Disabled
6 Disabled
7 Disabled
8 Disabled
9 Disabled
10 Disabled
11 Disabled
12 Disabled
13 Disabled
14 Disabled
15 Disabled
16 Disabled
DES-3026:4#
To Next Page
Loading...
