DES-3000 Series Layer 2 Switch CLI Reference Manual
170
enable port_security trap_log
Purpose Used to enable the trap log function for port security.
Syntax
enable port_security trap_log
Description This command is used to send trap messages to the Switch’s log
when a new MAC address violates the pre-defined port security
configuration. This information will include the MAC address of the
undefined device along with the port being infringed upon.
Parameters None.
Restrictions Only Administrator-level users can issue this command.
Example usage:
To enable the port security log trap function:
DES-3026:4# enable port_security trap_log
Command: enable port_security trap_log
Success.
DES-3026:4#
disable port_security trap_log
Purpose Used to disable the trap log function for port security.
Syntax
disable port_security trap_log
Description This command is used to disable sending trap messages to the
Switch’s log when a new MAC address violates the pre-defined port
security configuration. This information will include the MAC address
of the undefined device along with the port being infringed upon.
Parameters None.
Restrictions Only Administrator-level users can issue this command.
DES-3026:4#disable port_security trap_log
Command: disable port_security trap_log
Success.
DES-3026:4#
To Next Page
Loading...
