DES-3000 Series Layer 2 Switch CLI Reference Manual
206
show sim
the SIM group. This screen will produce the following results:
Port – Displays the physical port number of the commander switch where the uplink
to the neighbor switch is located.
MAC Address – Displays the MAC Address of the neighbor switch.
Role – Displays the role (CS, CaS, MS) of the neighbor switch.
Restrictions Only Administrator-level users can issue this command.
Example usage:
To show the SIM information in detail:
DES-3026:4#show sim
Command: show sim
SIM Version : VER-1.61
Firmware Version : 4.20.B27
Device Name :
MAC Address : 00-1C-F0-11-69-59
Capabilities : L2
Platform : DES-3026 L2 Switch
SIM State : Disabled
Role State : Candidate
Discovery Interval : 30 sec
Holdtime : 100 sec
DES-3026:4#
To show the candidate information in summary, if the candidate ID is specified:
DES-3026:4#show sim candidates
Command: show sim candidates
ID MAC Address Platform / Hold Firmware Device Name
Capability Time Version
--- ----------------- ------------------ ----- --------- -------------
1 00-01-02-03-04-00 DES-3018 L2 Switch 40 4.20.B27 The Man
2 00-55-55-00-55-00 DES-3026 L2 Switch 140 4.20.B27 default
master
Total Entries: 2
DES-3026:4#
To show the member information in summary, if the member ID is specified:
To Next Page
Loading...
