D-Link DES-3010F - Page 223

DES-3000 Series Layer 2 Switch CLI Reference Manual
219
config ssh server
rekey [10min |30min |60min |never]  Specifies time to re-generate session
key. never means do not re-generate session key.
Restrictions Only Administrator-level users can issue this command.
Example usage
To configure an SSH server max session of 3:
DES-3026:4# config ssh server maxsession 3
Command: config ssh server maxsession 3
Success.
DES-3026:4#
enable ssh
Purpose Used to enable the SSH server.
Syntax
enable ssh server
Description
The enable ssh command enables SSH server services.
Parameters None.
Restrictions Only Administrator-level users can issue this command.
Example usage
To enable SSH server:
DES-3026:4#enable ssh
Command: enable ssh
Success.
DES-3026:4#