DES-3000 Series Layer 2 Switch CLI Reference Manual
222
config 802.1x fwd_pdu system
config 802.1x guest_vlan ports
config 802.1x init
config 802.1x reauth
config account
config address_binding aging_interval
CTRL+C ESC q Quit SPACE n Next Page ENTER Next Entry a All
Example usage:
To display the parameters for a specific command:
DES-3026:4#? config igmp_snooping
Command: config igmp_snooping
Command: config igmp_snooping
Usage: [vlan_name <vlan_name 32> | all] {host_timeout <sec
1-16711450> | router_timeout <sec 1-16711450> | leave_timer
<sec 1-16711450> | state [enabled | disabled | fast_leave
[enabled | disabled]}
Description: Used to configure IGMP snooping on the switch.
config igmp_snooping querier
DES-3026:4#
show command_history
Purpose Used to display the command history.
Syntax
show command_history
Description This command will display the command history.
Parameters None.
Restrictions None.
Example usage
To display the command history:
DES-3026:4#show command_history
Command: show command_history
?
? show
show vlan
config router_ports vlan2 add 1:1-1:10
config router_ports vlan2 add
config router_ports vlan2
config router_ports
show vlan
create vlan vlan2 tag 3
To Next Page