DES-3000 Series Layer 2 Switch CLI Reference Manual
4
After the Switch reboots and you have logged in, the console looks like this:
DES-3026 Fast Ethernet Switch Command Line Interface
Firmware: Build 4.20.B27
Copyright(C) 2008 D-Link Corporation. All rights reserved.
UserName:
PassWord:
DES-3026:4#_
Figure 2-1. Console Screen after login
Commands are entered at the command prompt, DES-3026:4#.
There are a number of helpful features included in the CLI. Entering the ? command will display a list of all the top-level
commands.
..
?
cable_diag ports
clear
clear arptable
clear counters
clear fdb
clear log
clear port_security_entry port
config 802.1p default_priority
config 802.1p user_priority
config 802.1x auth_mode
config 802.1x auth_parameter ports
config 802.1x auth_protocol
config 802.1x capability ports
config 802.1x fwd_pdu ports
config 802.1x fwd_pdu system
config 802.1x guest_vlan ports
config 802.1x init
config 802.1x reauth
config account
config address_binding aging_interval
CTRL+C ESC q Quit SPACE n Next Page ENTER Next Entry a All
Figure 2-2. The ? Command
The dir command has the same function as the ? command.
To Next Page
Loading...
