DES-3000 Series Layer 2 Switch CLI Reference Manual
83
show log_save_timing
Purpose Used to display the method currently used for automatic saving of log to Syslog
host.
Syntax
show_save_timing
Description
The show log save timing command will display the current configuration of
saving Switch logs to designated hosts.
Parameters None.
Restrictions Only Administrator-level users can issue this command.
Example usage:
To configure log timing:
DES-3026:4#show log_save_timing
Command: show log_save_timing
Saving log method : on_demand
DES-3026:4#
To Next Page
Loading...
