DES-3000 Series Layer 2 Switch CLI Reference Manual
87
DES-3026:4#disable stp
Command: disable stp
Success.
DES-3026:4#
show stp
Purpose Used to display the Switch’s current STP configuration.
Syntax
show stp
Description This command displays the Switch’s current STP configuration.
Parameters None.
Restrictions None.
Example usage:
To display the status of STP on the Switch:
Status 1: STP enabled with STP compatible version
DES-3026:4#show stp
Command: show stp
STP Status : Enabled
Max Age : 20
Hello Time : 2
Forward Delay : 15
Priority : 32768
Default Path Cost : 802.1T
STP Version : STP compatible
TX Hold Count : 3
Forwarding BPDU : Enabled
Designated Root Bridge: 00-54-85-26-05-00
Root Priority : 4096
Cost to Root : 200004
Root Port : 19
Last Topology Change : 6sec
Topology Changes Count: 37
Protocol Specification: 3
Max Age : 20
Hello Time : 2
Forward Delay : 15
Hold Time : 3
To Next Page
Loading...
