D-Link DES-3010G - Page 140

DES-3000 Series Layer 2 Switch CLI Reference Manual
136
show lacp_port
Purpose Used to display current LACP port mode settings.
Syntax
show lacp_port {<portlist>}
Description This command will display the LACP mode settings as they are
currently configured.
Parameters <portlist> – Specifies a range of ports that will be viewed.
Restrictions None.
Example usage:
To display LACP port mode settings:
DES-3026:4#show lacp_port 1-11
Command: show lacp_port 1-11
Port Activity
------ --------
1 Active
2 Active
3 Active
4 Active
5 Active
6 Active
7 Passive
8 Passive
9 Passive
10 Passive
11 Passive
DES-3026:4#