D-Link DES-3010G - Page 142

DES-3000 Series Layer 2 Switch CLI Reference Manual
138
DES-3026:4#config ipif System ipaddress
10.48.74.122/8
Command: config ipif System ipaddress
10.48.74.122/8
Success.
DES-3026:4#
show ipif
Purpose Used to display the configuration of an IP interface on the Switch.
Syntax
show ipif
Description This command will display the configuration of an IP interface on the
Switch.
Parameters None.
Restrictions None.
Example usage:
To display IP interface settings.
DES-3026:4#show ipif
Command: show ipif
IP Interface Settings
Interface Name : System
IP Address : 10.48.74.122 (MANUAL)
Subnet Mask : 255.0.0.0
VLAN Name : default
Admin. State : Disabled
Link Status : Link UP
Member Ports : 1-26
Description : MyNet
DES-3026:4#