DES-3000 Series Layer 2 Switch CLI Reference Manual
214
33
SSH SERVER COMMANDS
The SSH Server commands in the Command Line Interface (CLI) are listed (along with the appropriate parameters) in the
following table.
Command Parameters
config ssh algorithm
[3DES| AES128| AES192| AES256| arcfour|blowfish|
cast128| twofish128| twofish192| twofish256| MD5| SHA1|
RSA| DSA] [enable| disable]
show ssh algorithm
config ssh authmode [password|publickey|hostbased ] [enable|disable]
show ssh authmode
config ssh user <username 15> authmode [publickey |password
|hostbased [hostname <domain_name 32> |hostname_ip
<domain_name 32> <ipaddr>]]
show ssh user authmode
config ssh server
{maxsession <int 1-8> |contimeout <sec 120-600>
|authfail <int 2-20> | rekey [10min |30min |60min |never]}
enable ssh
disable ssh
show ssh server
Each command is listed, in detail, in the following sections.
config ssh algorithm
Purpose Used to configure the SSH server algorithm.
Syntax
config ssh algorithm [3DES| AES128| AES192| AES256|
arcfour|blowfish| cast128| twofish128|twofish192| twofish256| MD5|
SHA1| RSA| DSA] [enable| disable]
Description
The config ssh algorithm command configures the SSH service algorithm.
Parameters
3DES An SSH server encryption algorithm.
AES128 An SSH server encryption algorithm.
AES192 An SSH server encryption algorithm.
AES256 An SSH server encryption algorithm.
Arcfour An SSH server encryption algorithm.
Blowfish An SSH server encryption algorithm.
cast128 An SSH server encryption algorithm.
twofish 128 An SSH server encryption algorithm.
twofish192 An SSH server encryption algorithm.
twofish256 An SSH server encryption algorithm.
MD5 An SSH server encryption algorithm.
To Next Page
Loading...
