D-Link DES-3010G - Page 224

DES-3000 Series Layer 2 Switch CLI Reference Manual
220
disable ssh
Purpose Used to disable SSH server service.
Syntax
disable ssh server
Description
The disable ssh command disables SSH server services.
Parameters None.
Restrictions Only Administrator-level users can issue this command.
Example usage
To disable SSH server:
DES-3026:4# disable ssh
Command: disable ssh
Success.
DES-3026:4#
show ssh server
Purpose Used to show SSH server.
Syntax
show ssh server
Description
The show ssh server command show SSH server general information.
Parameters None
Restrictions None.
Example usage
To show ssh server:
DES-3026:4# show ssh server
Command: show ssh server
SH Server Status : Disabled
SSH Max Session : 8
Connection Timeout : 120 (sec)
Authenticate Failed Attempts : 2
Rekey Timeout : never
Listened Port Number : 22
DES-3026:4#