DES-3010F/DES-3010FL/DES-3010G/DES-3016/DES-3018/DES-3026 Fast Ethernet Switch Manual
100
IGMP Access Control Settings
This window is used to enable the IGMP access control settings on the switch. When the access control
settings are enabled the switch will receive an IGMP join message, the switch will then send the access
request to the radius server to complete the authentication process. To view this window click, L2 Features
> IGMP Snooping > IGMP Access Control Settings
Figure 7- 16. IGMP Access Control Settings
The following parameters can be set:
Parameter Description
From…To
Enter a port or group of ports that may be configured for IGMP Access Control settings.
Status
This function is used to Enable or Disable the IGMP Access Control Settings.
Click Apply to implement the new settings.
To Next Page
Loading...
