DES-3326S Layer 3 Fast Ethernet Switch User’s Guide
Web-Based Switch Management 275
aggregation group. If two redundant link aggregation groups
are configured on the switch, STP will block one entire group –
in the same way STP will block a single port that has a
redundant link.
To configure a link aggregation group, click on the Link
Aggregation link from the Advanced Setup folder:
Figure 6-74. Link Aggregation
To add a new multicast MAC address to the switch’s
forwarding table, click the New button:
Figure 6-75. Link Aggregation − New
To Next Page
Loading...
