DES-3326S Layer 3 Fast Ethernet Switch User’s Guide
Web-Based Switch Management 283
process the value in the seconds field
of the BOOTP or DHCP packet. If a
non-zero value is entered, the switch
will use that value, along with the
hop count to determine whether to
forward a given BOOTP or DHCP
packet.
To configure the BOOTP/DHCP Relay interface, click on
the BOOTP/DHCP Relay Interface Configuration link:
Figure 6-82. BOOTP/DHCP Relay Interface Configuration
To add a new entry, click the New button:
Figure 6-83. BOOT/DHCP Relay Interface Configuration − Add
To Next Page
