DES-3326S Layer 3 Fast Ethernet Switch User’s Guide
Web-Based Switch Management 285
The following fields can be set:
Parameter Description
DNS Relay State
<Disabled>
This field can be toggled between
Disabled and Enabled using the pull-
down menu, and is used to enable or
disable the DNS Relay service on the
switch.
Name Server (1)
<0.0.0.0>
Allows the entry of the IP address of
a primary domain name server
(DNS).
Name Server (2)
<0.0.0.0>
Allows the entry of the IP address of
a secondary domain name server
(DNS).
DNSR Relay Cache
Server Status
<Disabled>
This can be toggled between Disabled
and Enabled. This determines if a
DNS cache will be enabled on the
switch.
DNS Relay Static
Table Lookup
Status <Disabled>
This field can be toggled using the
pull-down menu between Disabled
and Enabled. This determines if the
static DNS table will be used or not.
To make a static DNS table entry, click on the DNS Relay
−
Static Table Configurations link:
To Next Page
Loading...
