xStack DES-3526 / DES-3526DC Layer 2 Stackable Fast Ethernet Managed Switch User Manual
116
Figure 7- 14. Login Method List - Edit window (default)
Figure 7- 15. Login Method List – Add window
To define a Login Method List, set the following parameters and click Apply:
Parameter Description
Method List Name
Enter a method list name defined by the user of up to 15 characters.
Method 1, 2, 3, 4
The user may add one, or a combination of up to four of the following authentication
methods to this method list:
• tacacs - Adding this parameter will require the user to be authenticated using the
TACACS protocol from a remote TACACS server.
• xtacacs - Adding this parameter will require the user to be authenticated using the
XTACACS protocol from a remote XTACACS server.
• tacacs+ - Adding this parameter will require the user to be authenticated using the
TACACS+ protocol from a remote TACACS+ server.
• radius - Adding this parameter will require the user to be authenticated using the
RADIUS protocol from a remote RADIUS server.
• server_group - Adding this parameter will require the user to be authenticated
using a user-defined server group previously configured on the Switch.
• local - Adding this parameter will require the user to be authenticated using the
local user account database on the Switch.
• none - Adding this parameter will require an authentication to access the Switch.
To Next Page
Loading...
