D-Link DES-3526 - 802.1 P Default Priority; 802.1 P User Priority

xStack DES-3526 / DES-3526DC Layer 2 Stackable Fast Ethernet Managed Switch User Manual
71
802.1p Default Priority
Figure 6- 48. 802.1p Default Priority Settings window
802.1p User Priority
Figure 6- 49. QoS Class of Traffic window
The Switch allows the assignment of a default 802.1p
priority to each port on the Switch. In the
Configuration folder open the QoS folder and clic
k
802.1p Default Priority, to view the window shown to
the right. This window allows you to assign a defaul
t
802.1p priority to any given port on the Switch. The
priority queues are numbered from 0, the lowes
t
priority, to 7, the highest priority. Click Apply to
implement your settings.
The DES-3526 allows the assignment of a use
r
p
riority to each of the 802.1p priorities. In the
Configuration folder open the QoS folder an
d
click 802.1p User Priority, to view the screen
shown below. Once you have assigned a priorit
y
to the port groups on the Switch, you can then
assign this Class to each of the 4 levels of 802.1p
priorities. Click Apply to set your changes.