Quick Installation Guide
DGS-1005D/DGS-1008D
DGS-1005D
DGS-1008D
These are the items included with your DGS-1005D / DGS-1008D purchase:
Notice Before Setting Up the DGS-1005D / DGS-1008D
Check Your Package Contents
5 / 8-Port Gigabit Desktop Switch
The setup of the Switch can be performed using the following steps:
A. Install the DGS-1005D / DGS-1008D in a fairly cool and dry place. See Technical
Specication for the acceptable operation temperature and humidity ranges.
B. Install the Switch in a site free from strong electromagnetic source, vibration, dust, and
direct sunlight.
C. Leave at least 10cm of space at the left and right hand side of the Switch for ventilation.
D. Visually inspect the DC power jack and make sure that it is fully secured to the power
adapter.
Quick Installation Guide
DC Power Adapter
Note :
Using a power supply with a different voltage rating will
damage and void the warranty of this product.
Do not stack any device on top of the Switch.
To Next Page
Loading...
