Rear Panel Description
The power cable connection is located on the rear panel of the Switch.
DC Power Jack:
Power is supplied through an external 12V/1A AC power adapter for
DGS-1016A and an external 12V/1.5A AC power adapter for DGS-
1024A. Check the technical specification section for information about
the AC power input voltage.
• DGS-1016A
DGS-1016A Rear Panel
• DGS-1024A
DGS-1024A Rear Panel
10/100/1000BASE-T Ports:
There are 16/24 Gigabit Ethernet, Auto-Negotiating ports
(10/100/1000Mbps)
Comprehensive LED indicators display the conditions of the Switch and
status of the network.
13
To Next Page
Loading...
