4 Configuration D-Link Smart Managed Switch User Manual
2
2
5
5
L2 Features > FDB > MAC Address Table
The MAC Address Table page allows user to view the entries listed in the MAC address table.
Figure 4.28 – L2 Features > FDB > MAC Address Table
The fields that can be configured for MAC Address Table are described below:
Item Description
Port
Select a single port or all ports. The information for the port(s) will
be displayed in the information table.
Table 4.15
Click Find to locate a specific entry based on the information entered.
Click Select All to select all dynamic MAC addresses.
Click Clear All to clear all dynamic MAC addresses.
NOTE: When viewing the differen
the device will take a moment to refresh the UI.
L2 Features > VLAN > 802.1Q VLAN
A Virtual Local Area Network (LAN) is a group of ports that can be anywhere in the network, but
communicate as though they were in the same area.
VLANs can be easily organized to reflect department groups (such as R&D, Marketing), usage groups (such
as e-mail), or multicast groups (multimedia applications such as video conferencing), and therefore help to
simplify network management by allowing users to move devices to a new VLAN without having to change
any physical connections.
The IEEE 802.1Q VLAN Configuration page provides powerful VID management functions. The original
settings have the VID as 1, no default name, and all ports as “Untagged”
Figure 4.29 – L2 Features > VLAN > 802.1Q VLAN
Click Rename to rename the VLAN group.
Click Delete to remove the VLAN group.
To create a new VID group, click Add VID and the following will be displayed:
Figure 4.30 – L2 Features > VLAN > 802.1Q VLAN – Add VID
To Next Page
Loading...
