EasyManua.ls Logo

D-Link DGS-1100-05PDV2 - L2 Features > VLAN > Voice VLAN

D-Link DGS-1100-05PDV2
56 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
4 Configuration D-Link Smart Managed Switch User Manual
2
2
9
9
User-defined MAC Settings
Component Type
Surveillance VLAN will automatically detect D-Link surveillance
devices
by default. There are another five surveillance
components that can
be configured for surveillance VLAN.
These five components are Video Management Server (VMS),
VMS Client, Video Encoder, Network Storage, and Other IP
brand’s Surveillance Devices. Usually, VMS and VMS Clients
are necessary components for an IP surveillance service.
Description Enter a description for the component.
MAC-Address Enter a MAC address of the component.
Table 4.19
Click Apply to make the configurations take effect.
Click Delete to remove the Surveillance VLAN entry.
L2 Features > VLAN > Voice VLAN
Voice VLAN is a feature that allows you to place the voice traffic from D-Link IP phones to an assigned VLAN
to enhance the IP voice service. With a higher priority and individual VLAN, the quality and the security
of voice traffic are guaranteed. The Voice VLAN function will check the source MAC address / VLAN ID on
the incoming packets. If it matches the specified MAC address / VLAN ID, the packets will pass through with
desired priority.
Figure 4.37L2 Features > VLAN > Voice VLAN
The fields that can be configured for Voice VLAN are described below:
Item Description
Voice VLAN Global Settings
Voice VLAN Specify to enable or disable the Voice VLAN function.
VLAN ID Specify the VLAN ID to act as a Voice VLAN.
Priority
Specify the priority level. The levels of priority are High,
Medium and Low. The default priority is High.
OUI Settings
Default OUI
Pre-defined Organizationally Unique Identifier (OUI) values,
including 3COM, Cisco, Veritel, Pingtel, Siemens,
NEC/Phillips, Huawei3COM, and Avaya.
User defined OUI
The user can manually create a Telephony OUI with a
description. The maximum number of user defined OUIs is 5. It
will occupy one ACL rule when selecting user defined OUI by
default, and to configure one user-defined OUI will take extra
one ACL rule. System will auto-generate an ACL profile for all

Table of Contents

Other manuals for D-Link DGS-1100-05PDV2

Related product manuals