D-Link DGS-1100-10MP - IP-Camera Information; IP-Camera Details

D-Link DGS-1100 MP/MPP Series Switch User Manual
33
7. IP-Camera Information
The IP-Camera Information section provides information on each camera connected to the switch.
It features the port number, device type, throughput, IP address and other information such as port
description, power consumption and location.
To view the following window, click on the IP-Camera Information link in the navigation menu:
Figure 7-1 Port Information Window
The total device count, throughput and power consumption is listed at the top of the page. The icon
descriptions are as follows:
Icon Description
The total number of ONVIF IP-Cameras detected.
The total inbound throughput for all ports on the switch.
The PoE consumption of the switch. This is listed as one negative integer
and one positive integer. The negative integer is the power being consumed
by the PoE devices connected to the switch. The positive integer is the total
PoE budget for the ports currently using PoE, based on the type of PoE in
use.
Hover-over each field to get more information about each value. A breakdown of each field is
below:
Icon Description
The port number of the port.
The device icon or photo. A generic photo will displayed for a non-D-Link
ONVIF camera. A D-Link-specific photo will be displayed for a D-Link ONVIF
camera.