D-Link DGS-1100-10MP - Surveillance Settings; VLAN and IP Configuration

D-Link DGS-1100 MP/MPP Series Switch User Manual
43
12. Surveillance Settings
The Surveillance Settings page is used to configure the settings for the Surveillance VLAN. This is
a VLAN dedicated for IP-Camera and surveillance traffic and can be used to manage surveillance
devices on the network.
To view the following window, click on the Surveillance Settings link in the navigation menu:
Figure 12-1 Surveillance Settings Window
The fields that can be configured for the Surveillance VLAN Settings are described below:
Parameter Description
VLAN ID (2-4094)
Enter a VLAN number for the surveillance VLAN in the range
(2-4094).
Click the Apply button to accept the changes made.
The fields that can be configured for the IP Settings are described below:
Parameter Description
Get IP From
Choose how the management IP for this VLAN is assigned to
the switch. Options are: DHCP, Static or BOOTP. If Static is
chosen, the following fields become available:
IP Address
Enter the IP address for the surveillance VLAN management
IP.
Mask
Enter the netmask for the surveillance VLAN management IP.
Gateway
Enter the gateway for the surveillance VLAN.
Click the Apply button to accept the changes made.