Need help?Do you have a question about the D-Link DGS-1250-52X and is the answer not in the manual?
General| Product Type | Managed Switch |
|---|---|
| Number of Ports | 52 |
| Ports | 48 x 10/100/1000Base-T, 4 x 10G SFP+ |
| Switching Capacity | 176 Gbps |
| Forwarding Rate | 130.95 Mpps |
| MAC Address Table Size | 16K |
| Power over Ethernet (PoE) | No |
| Rack Mountable | Yes |
| Port Type | Gigabit Ethernet |
| Jumbo Frame | 9KB |
| Dimensions | 440 x 44 mm |
| Operating Temperature | 50 °C |
| Storage Temperature | -40 to 70 °C |
| Humidity | 95% non-condensing |
| Layer | Layer 2+ |
Provides essential guidelines for safely and properly installing the switch in its intended environment.
Describes the steps for powering on the switch using an AC power cord and observing the boot-up process.
Provides instructions on connecting to the switch's console port using a serial cable for initial management.
Guides on creating user accounts for secure access and management of the switch via the CLI.
Explains how to assign an IP address for network management and Web UI access, including default settings.
Provides steps to access the switch's Web User Interface via a web browser using its IP address and default credentials.
Outlines performance metrics such as transmission method, packet buffer size, switching capacity, and forwarding rates.
Describes the functions and supported standards for console, RJ45, and SFP/SFP+ ports, including transceiver compatibility.
Provides essential safety guidelines for personal safety and protecting the system from potential damage.
Lists critical precautions to reduce risks of injury, electrical shock, fire, and equipment damage.
Offers safety precautions for installing systems and components within a rack to ensure stability and prevent tipping.
Details steps to prevent damage to sensitive electronic components from electrostatic discharge (ESD).
To Next Page