Need help?Do you have a question about the D-Link DGS-1210 Series and is the answer not in the manual?
General| Model | DGS-1210 Series |
|---|---|
| Uplink Ports | 2/4 (varies by model) |
| VLAN Support | Yes |
| QoS | Yes |
| Management | Web-based |
| Dimensions | Varies depending on the model |
| Weight | Varies depending on the model |
| Operating Temperature | 0°C to 45 °C |
| Power Consumption | Varies depending on the model |
| Certifications | CE, FCC, RoHS |
| Port Count | 24, 48 (varies by model) |
| Gigabit Ethernet Ports | 24, 48 (varies by model) |
| PoE Support | Available on some models (DGS-1210-28P, DGS-1210-52P, etc.) |
| Jumbo Frame Support | Yes, up to 9, 216 Bytes |
| Storage Temperature | -40°C to 70°C |
Provides critical safety precautions to prevent injury and equipment damage during installation.
Describes the initial configuration utility for setting up basic switch parameters.
Provides an overview of the main interface areas for switch configuration and monitoring.
Covers configuration of IP interface, system name, and essential network services like DNS/DHCP.
Explains configuration of VLANs, Spanning Tree, Link Aggregation, and Multicast features.
Details Layer 3 routing, Quality of Service, and various security features for network control.
Covers AAA, Access Control Lists, Power over Ethernet, and SNMP settings for network management.
Displays device connections and detailed information on connected cameras and NVRs.
Details PoE status and allows scheduling of power delivery to PoE ports.
Lists detailed hardware components, performance metrics, and physical characteristics of the switches.
To Next Page
