D-Link DGS-1210 Series - L2 Functions > LLDP > 802.3 Extension TLV

4 Web-based Switch Configuration D-Link Smart Managed Switch User Manual
74
Figure 4.84 – L2 Functions > LLDP > 802.1 Extension TLV Port Settings
From Port / To Port: A consecutive group of ports may be configured starting with the selected port.
Port VLAN ID: Specifies the Port VLAN ID to be enabled or disabled.
VLAN Name: Specifies the VLAN name to be enabled or disabled in the LLDP port. If select Enabled, users
can specifies the content of VLAN ID or VLAN Name or all.
Protocol Identity: Specifies the Protocol Identity to be enabled or disabled in the LLDP port. If select
Enabled, users can specifies the EAPOL, LACP, GVRP, STP or ALL.
Click the Apply button to implement changes made and click Refresh to refresh the table information.
L2 Functions > LLDP > 802.3 Extension TLV
The 802.3 Extension LLDP Port Settings page displays 802.3 Extension LLDP port information and contains
parameters for configuring 802.3 Extension LLDP port settings.
Figure 4.85 – L2 Functions > LLDP > 802.3 Extension TLV
From Port / To Port: A consecutive group of ports may be configured starting with the selected port.
MAC/PHY Configuration/Status: Specifies whether the MAC/PHY Configuration Status is enabled on the
port. The possible field values are:
Enabled – Enables the MAC/PHY Configuration Status on the port.
Disabled – Disables the MAC/PHY Configuration Status on the port.