D-Link DGS-1210 Series - Save; Debug Info

6 Command Line Interface D-Link Smart Managed Switch User Manual
158
DGS-1210-52MP>
save
Purpose To save changes in the Switch’s configuration to non-volatile
RAM.
Syntax save [config config_id <integer (1-2)>]
Description
The save command
saves the configuration changes to the
memory.
Parameters None.
Restrictions None.
Example usage:
To save the Switch’s current configuration to non-volatile RAM:
DGS-1210-52MP> save config config_id 2
Building configuration ...
[OK]
DGS-1210-52MP>
debug info
Purpose
To display the ARP table and MAC FDB information of the
Switch.
Syntax debug info
Description The debug info command
displays the ARP table and MAC
FDB of the Switch.
Parameters None.
Restrictions None.
Example usage:
To display the ARP table and MAC FDB information of the Switch:
DGS-1210-52MP> debug info
% sgementation fault log file :
File doesn't exist !!!
% ARP table :
Address Hardware Address Type Interface Mapping
------- ---------------------------- --------- ------------- --------------
10.0.0.0 ff-ff-ff-ff-ff-ff ARPA vlan1 Static
10.90.90.90 4a-6f-6e-01-01-01 ARPA vlan1 Static
10.90.90.96 3c-97-0e-e5-76-4d ARPA vlan1 Dynamic
10.255.255.255 ff-ff-ff-ff-ff-ff ARPA vlan1 Static